NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の落札結果
中古送料無料


NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の商品画像

NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像1
NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像2
NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像3
NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像4
NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像5
NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像6

NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像1
NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像2
NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像3
NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像4
NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像5
NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の画像6

NEC UNIVERGE IX2106 動作品 初期化済み 最新FW 10.9.26 その3の商品説明

NECのルーターIX2106です
- 個別に確認済みの動作品です。コンソール出力をご参照ください。
- Webモードへ初期化済みです。特別な設定なくご利用いただけます。
- 割と大量の出品ですので写真は一台の流用です。
- 中古で購入したもので目立つものはないが多少キズがついています。
- 本体のみとなります。LANケーブル、コンソールケーブル、電源ケーブルなどの付属品がありません。
- 写真では一部の情報を伏せいております。
- 匿名配送にて発送します。
- できるだけ早めに発送をしますがダンボールの在庫などによって多少お待ちいただくことがあります。また、個人ですので時間の空きなどにも影響されます。
- 一部の機能の使用には専門知識が必要になる場合もありますが、こちらでのサポートはなしとさせていただきます。
- 中古品ですのでNCNRでお願いします。

NEC Diagnostic Software
Copyright (c) NEC Corporation 2001-2023. All rights reserved.

%DIAG-INFO: Starting System POST(Power On Self Test)

DRAM TEST 1: Pass
DRAM TEST 2: Pass
CPU TEST: Pass
PLD TEST: Pass
RTC TEST: Pass
GE0 TEST: Pass
GE1(SW-HUB)1-4 TEST: Pass
1.0 VOLTAGE STATUS: 0.973V Pass
1.35 VOLTAGE STATUS: 1.311V Pass
2.5 VOLTAGE STATUS: 2.418V Pass
3.3 VOLTAGE STATUS: 3.268V Pass
5.0 VOLTAGE STATUS: 5.018V Pass
TEMPERATURE STATUS: +40.0degC Pass

NEC Bootstrap Software
Copyright (c) NEC Corporation 2001-2023. All rights reserved.

%BOOT-INFO: Trying flash load, exec-image [ix2106-ms-10.9.26.ldc].
Loading: ######################################################################################################################################## [OK]


Starting at 0x20000

Configuring router subsystems (before IDB proc): done.
Constructing IDB(Interface Database): done.
Configuring router subsystems (after IDB proc): done.
Initializing router subsystems: done.
Starting router subsystems: done.

All router subsystems coming up.


XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

WARNING! Administrative username is not configured!!
Action: Please configure administrative username.

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX


NEC Portable Internetwork Core Operating System Software
Copyright Notices:
Copyright (c) NEC Corporation 2001-2023. All rights reserved.
Copyright (c) 1985-1998 OpenROUTE Networks, Inc.
Copyright (c) 1984-1987, 1989 J. Noel Chiappa.
Router# show hardware
IX Series IX2106 Hardware Platform

S/N: **********

ZTP:
ZTP ID : ************#IX#IX2106#**********
Status : stopped
Next boot mode : normal mode

Processor board:
Processor board ID
CPU/DDR3/CSB/LBUS clock frequencies are 800/800/400/100 MHz
P1010E processor (revision 0x80f90020)
262144K bytes of main memory
1024K bytes of non-volatile configuration memory
32768K bytes of processor flash memory

IPsec accelerator:
on board security engine(SEC4.4), revision 0x100

Onboard interface unit GigaEthernet0:
GigaEthernet Transceiver is 88E6352
Onboard interface unit GigaEthernet1:
GigaEthernet Switch with Transceivers is 88E6352

LED information:
PWR: On ALM: Off BSY: Off
VPN: Off PPP: Off BAK: Off
Router# show version
NEC Portable Internetwork Core Operating System Software
IX Series IX2106 (magellan-sec) Software, Version 10.9.26, RELEASE SOFTWARE
Compiled Aug 22-Fri-2025 15:23:55 JST #2 by sw-build, coregen-10.9(26)

ROM: System Bootstrap, Version 13.1
System Diagnostic, Version 13.1
Initialization Program, Version 4.2

System uptime is 1 minute
System woke up by reload, caused by power-on
System started at Sep 30-Tue-2025 02:51:03 JST
System image file is "ix2106-ms-10.9.26.ldc"

Processor board ID
IX2106 (P1010E) processor with 262144K bytes of memory.
2 GigaEthernet/IEEE 802.3 interfaces
1024K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)

Default console is web.
Router# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# show flash
Codes: M - Main-side, B - Backup-side, N - Newfile, R - Runnable
A - Active-file, + - Next-boot, * - Bootmode-entry
Length Name Status
6957563 ix2106-ms-10.1.15.ldc B
8928293 ix2106-ms-10.9.26.ldc MA

[16111032 bytes used, 10871562 available, 26982594 total]
26368 Kbytes of processor board System flash (Read/Write)
Router(config)#

オークション情報 中古送料無料

落札価格 8,000
入札件数 1件(入札履歴
商品の状態 目立った傷や汚れなし
発送方法 おてがる配送宅急便コンパクト
発送地域 東京都
終了日時 2025年10月17日 23時10分
出品者 nekoeki評価
オークションID l1202089174

カテゴリ落札トレンド